PLC Controlled Blister Packing Machine For Aluminum Plastic Blister
Material: Stainless steel 304
Blanking frequency:15-50 Cutting/min
Capacity of air compressor:≥0.36 m3/min
Model No.: DPP-250F
Capacity: 12000 Sheets per hour
Power Supply: 380V 50HZ Three Phase
Certificate: CE Certificate
1. Travel scope can be adjusted.
2. Alu Alu Blister Packaging is available for this machine.
3. Mould is located by locating groove which makes it easy to
change mould. The machine heats the PVC through conduction and
forms it through pressing and frothing.
4. The material is fed automatically. The mould and feeder can be
designed as user’s requirements.
5. Speed is shifted by step-less transducer. Adopt the interface of
human-machine and PLC programmable controller, it can synchronize
6. Adopt the equipment of trace pressing, batch number printing and
7. Stepping motor Pulling Material more accuracy and easy adjusting
8. The heating moulds will automatically separate when the machine
stops, which contributes to protect the material between them and
extend the machine’s life.
The machine is new product which is improved based on customer’s
requirements. It’s suitable for packaging of all kinds of liquid
and solid in large & medium pharmaceutical factory, health
medicine factory, hospital preparation lab, food industry,
electronic industry, hardware industry, etc. It can protect the
material from steam or dust, improve product packing degree, and
increase the additional value. The machine is used to produce large
quality and single product.
|Blanking frequency (Cutting/min):||15-50|
|Sheet's quantity of one blanking (sheets):||1-4|
|Adjustable scope of feed travel: (mm)||10-160|
|Max Forming area and depth (mm)||270×120×25|
|Capacity of air compressor(m3/min):||≥0.36|
|Power supply:||380V AC, 50 Hz, Three Phase|
Wrapper specification (mm): PVC Film
Alu Alu Foil
ALU/PVC blister packing machine, ALU/ALU blister packing machine,
flat plate blister packing machine